All-Power APG3105 Скачать руководство пользователя страница 23

Страница: 23 / 35

5. Visually inspect the spark plug.Discard it if the insulator is cracked or chipped.Clean the spark

plug with a wire brush if it is to be reused.

6. Measure the plug gap with a feeler gauge.

The gap should be 0.02-0.03in. Correct as necessary by carefully bending the side electrode.

Fig.18

7. Install the spark plug carefully by hand to avoid cross-threading.
8. After a new spark plug has been seated by hand,it should be tightened 1/2 turn with a wrench

to compress its washer. If a used plug is being reinstalled, it should only required 1/8 to 1/4 turn
after being seated.

9. Reinstall the spark plug inspection cover and tighten the cover screw.
10. Close the access door.

Plug gap

The spark plug must be securely tightened. An improperly tightened spark plug can become
very hot and possibly damage the generator.

Never use a spark plug with an improper heat range.

3500W Digital Generator

Содержание APG3105




































Результаты поиска

Содержание APG3105

Отзывы:

Похожие инструкции для APG3105

Бренды по названию

Популярные бренды

All-Power APG3105, Руководство пользователя

Результаты поиска

Содержание APG3105

Отзывы:

Похожие инструкции для APG3105

Бренды по названию

Популярные бренды