All-Power APG3105, Руководство пользователя

Страница: 16 / 35

5.GENERATOR USE
To prevent electrical shock from faulty appliances, the generator should be grounded.
Connect a length of heavy wire between the generator's ground terminal and an external
ground source.
Connections for standby power to a building's electrical system must be made by a qualified
electrician and must comply with all applicable laws and electrical codes.
Improper connections can allow electrical current from the generator to backfeed into the
utility lines. Such backfeed may electrocute utility company workers or other personel who
contact the lines during a power outage, and when utility power is restored, the generator
may explode, burn, or cause fires in the building's electrical system.
Limit operation requiring maximum power to 10 minutes.
For continuous operation do not exceed the rated power.
In either case, the total wattage of all appliances connected must be considered.
Do not modify or use the generator for other purposes than it is intended for.
Also observe the following when using the generator :
DO not connect generators in parallel.
Do not connect an extension to the exhaust pipe.
When connecting the generator to a household circuit, be sure to shut off all commercial
power supply.
When an extension cable is required, be sure to use tough rubber sheathed flexible cable.
Limit length of extension cables: 200ft for cables of 15AWG and 333.3ft for cables of 13AWG
Keep the generator away from other electric cables or wires such as commercial power
supply lines.
Fig.12
Owner’s Manual
14