7
Owner’s Manual
Hazard Warnings (cont’d)
RISK OF FIRE OR EXPLOSION
What could happen:
• Abrasive tools such as sanders and grinders, rotating tools such as drills, and
impact tools such as nailers, staples, wrenches, hammers, and reciprocating saws
are capable of generating sparks which could result in ignition of flammable materials.
• It is normal for the compressor motor and pressure switch to produce sparks while
operating. If sparks come into contract with vapors from gasoline or other solvents,
they may ignite, causing a fire or explosion.
• Exceeding the maximum pressure rating of tools or accessories could cause an
explosion resulting in serious injury.
How to prevent it:
• Never operate tools near flammable substances such as gasoline, cleaning solvents,
etc.
• Work in a clean, well ventilated area free of combustible materials.
• Never use oxygen, carbon dioxide or other bottled gases as power source for air
tools.
• Use compressed air regulated to maximum pressure at or below the rated pressure
of any attachments.
• Never connect to an air source that is capable of exceeding 90 psi .
• Always verify prior to using the tool that the air source has been adjusted to the rated
air pressure range.
• Never spray flammable liquids in a confined area. Do not spray where sparks or
flame are present.
• Do not smoke while spraying.
• Keep compressor as far from spray area as possible.
8
Owner’s Manual
Hazard Warnings (cont’d)
RISK OF HEARING LOSS
What could happen:
• Long term exposure to noise produced from the operation of air tools can lead to
permanent hearing loss
How to prevent:
• Always wear ANSI S3.19 hearing protection when using a compressor.
RISK TO BREATHING/INHALATION HAZARD
What could happen:
• Abrasive tools such as grinders, sanders and cut-off tools generate dust and
abrasive materials which can be harmful to human lungs and respiratory system.
• Some materials such as adhesives and tar contain chemicals whose vapors could
cause respiratory damage. Read all instructions to be sure that your respirator
mask will protect you.
• Always work in a clean, dry, well ventilated area.
• Never directly inhale the compressed air produced by a compressor .It is not suitable
for breathing purposes.
• Be certain to read all labels when you are spraying paints or toxic materials, and
follow the safety instructions.
