17
EN
17
• To clean the lid of the grill, wipe it with a sponge rinsed in hot water and then dry it with a soft, dry cloth.
• Do not immerse the casing of the grill in water or any other liquid.
• Ensure that the grill is clean and dry before storage.
• Any repairs must be carried out by an approved service representative.
FAQ
Problems
Cause
Solutions
button fl
solid
indicator
light + button
flashing.
Switching "ON" of the
appliance or starting an
automatic cooking cycle
with food between plates
and without preheating
(setting temperature). The
manual mode is
automatically activated.
2 possible options:- choose the temperature setting by
pressing the
button and then press
. Allow to
cook, but you must monitor the cooking (manual
mode).- Open completely the appliance, remove the
food, close the appliance properly, re-program the
appliance and wait until the end of preheating (setting
temperature).
The appliance stops
during the cycle of
preheating (setting
temperature) or
cooking.
The appliance has been
kept open for too long while
cooking.The appliance has
been idle too long after the
end of warm up (setting
temperature) or keep warm.
Disconnect the appliance from the outlet and leave for
2-3 mins, restart the process. The next time you use
the appliance, make sure you open and close it quickly
for the best cooking results. If the problem occurs again
contact your local All-Clad customer service.
AC_OPTIGRILL-AUTOSENSE_ 2100095568.qxp_XXXXXXX 12/04/2016 08:50 Page17
