ALKOTA 5305A, Руководство по обслуживанию, Страница: 41 / 56

37
Fuel Filter
Maitennace Schedule
PRIMING THE MACHINE
Shut off the fuel tank valves. Spin off the element, fill with clean
fuel and coat the square gasket (3) with fuel. Reinstall the
element and tighten 1/4 to 1/3 turns after the gasket contacts
the upper housing. Turn on the fuel tank valves. Start the
machine and check that there are no leaks.
2. DRAINING WATER
Check the collection bowl daily. Drain off water contaminants
by opening the head vent and then the drain. If more than 1/8
cup of fluid is drained, follow the priming instructions,
otherwise, close the vent and drain. Start the machine and allow
air to purge from the fuel system prior to operating the
equipment.
3. ELEMENT REPLACEMENT FREQUENCY
Frequency of element replacement is determined by con-
tamination level in the fuel. Replace the element upon power
loss of the engine (if so equipped) or every 500 hours
whichever comes first.
NOTE: Foul smelling diesel fuel is an indication of microbio-
logical contamination. A change in fuel source is recommended.
Always carry a spare element as one tank full of contaminated
fuel will plug the fuel filter element prematurely.
4. ELEMENT REPLACEMENT PROCEDURE:
1. Shut off the fuel tank valves.
2. Unscrew the amber bowl from the fuel filter.
3. Unscrew and discard the filter from the upper housing.
4. Follow listed procedures under “PRIMING”.
MAINTEN MAINTEN
MAINTEN MAINTEN
MAINTENA A
A A
ACE PR CE PR
CE PR CE PR
CE PROCEDURES OCEDURES
OCEDURES OCEDURES
OCEDURES
EXPL EXPL EXPL EXPL EXPLODED ODED ODED ODED ODED VIEW VIEW VIEW VIEW VIEW
GASKETS:
1. Inspect for deterioration or tearing.
2. Remove and Replace.
BOWLS:
Inspect rim of bowl to insure it is free
of nicks, cracks, or scratches.
FILTER ELEMENT:
1. Inspect for damage or deterioration.
2. Remove and Replace. (500 hours)
FUEL BOWL:
If contaminants are found, check more
frequently.
NOTE:
intervals stated are for normal operating conditions. the
intervals suggested may be shiortened or lengthened as
determined by existing conditions.
WEEKLY 100 HRS
*
*
*
*
*
*
MAINTEN MAINTEN MAINTEN MAINTEN MAINTENANCE SCHEDULE ANCE SCHEDULE ANCE SCHEDULE ANCE SCHEDULE ANCE SCHEDULE
FIL FIL
FIL FIL
FILTER, TER,
TER, TER,
TER, FUEL FUEL
FUEL FUEL
FUEL
BREAKDOWN - P/N V04-00308
7
6
1
8
4
5
3
2
10
9
PARTS LIST
ITEM PART NUMBER PART DESCRIPTION QTY.
1 V04-00308-02 HOUSING, UPPER 1
2 V04-00308-07 ASSEMBLY, DRAIN 1
3 V04-00308-06 BOWL, AMBER - 3" 1
4 V04-00308-01 ELEMENT, FILTER 1
5 V04-00308-05
O-RING - 3/32CS X 2 1/2ID
1
6 C07-01300-08 O-RING - 1/16CS X 5/16ID 1
7 V04-00308-08 PLUG, PIPE 1
8 V04-00308-03 RING, FLAT 1
9 V04-00308-K
KIT, REPLACEMENT
BOWL
1
10 V04-00308-04 ASSEMBLY, VENT 1
PARTS LIST
ITEM PART NUMBER PART DESCRIPTION QTY.
1 V04-00308-02 HOUSING, UPPER 1
2 V04-00308-07 ASSEMBLY, DRAIN 1
3 V04-00308-06 BOWL, AMBER - 3" 1
4 V04-00308-01 ELEMENT, FILTER 1
5 V04-00308-05
O-RING - 3/32CS X 2 1/2ID
1
6 C07-01300-08 O-RING - 1/16CS X 5/16ID 1
7 V04-00308-08 PLUG, PIPE 1
8 V04-00308-03 RING, FLAT 1
9 V04-00308-K
KIT, REPLACEMENT
BOWL
1
10 V04-00308-04 ASSEMBLY, VENT 1
Maintenance Schedule
W
eekly
EVRER
Y
100 HRS
Gaskets
Inspect for deterioration or tearing. ●
Remove and replace.
●
Bowls
Inspect rim of bowl to insure it is free of nicks,
cracks, or scratches.
●
Filter Element
Inspect for damage or deterioration. ●
Remove and replace.
Fuel Bowl
If contaminants are found, check more
frequently.
●
PART LIST
ITEM PART NUMBER PART DESCRIPTION QTY
1 V04-00308-02 Housing, Upper 1
2 V04-00308-07 Assembly, Drain 1
3 V04-00308-K Bowl, Amber – 3” 1
4 V04-00308-01 Element, Filter 1
5 V04-00308-05 O-Ring – 3/32CS x 2 1/2ID 1
6 V04-01300-08 O-Ring – 1/16CS x 5/16ID 1
7 ------------------ Plug, Pipe 1
8 V04-00308-03 Ring, Flat 1
9 V04-00308-K Kit, Replacement Bowl 1
10 V04-00308-04 Vent Plug & O-ring 1
Filter, Fuel
p/n V04-00308
Troubleshooting
Trouble Possible Cause Remedy
Fuel bowl leaking Deteriorated gasket Remove and
Housing cracked Remove and replace housing
Bowl rim cracked, nicked, ors cracked Remove and replace bowl
Gasket missing Replace gasket
Loose fuel bowl Tighten fuel bowl onto filter
Air leaking into system
(indicated by air bubbles
in bowl during operation)
Cracked component
Inspect filter bowl, filter housing,
and gasket
Loose filter bowl Tighten fuel bowl onto fuel filter
Loose valve assembly Tighten valve assembly