HOW TO OPERATE
DIG,TAL
WATER
IONIZER
1, Plug in the AC power plug head firmly.
2. Turn on the main power. Switch on the right side,
> The LCD screen lights and displays the initial mode,
& b u\
Holder
<initial modes>
Main Power Sw,tc
>
3. Slowly rotate the operation knob clockwise to
have the water inflow into the unit,
4. Notice the water inflow rate as shown in the screen and adjust if
necessary.
>
The water inflow rate is indicated in a numerical value,
> The optimum inflow rate is 2.0 ~ 2.5 litres/min.
>
Adjust the water inflow rate by using the operation knob.
>
The screen backlight color will be varied according to the
chosen function and pH level.
OF
1, Rotate the operation knob counterclockwise
to the (OFF)
position,
Inlet Water
Water Inflow
Temperature Indication
Rate Indication
ObI
Oi>O>O>O}
<The wheel begins spinning round>
>
2. The unit will return to standby mode status.
Indication after water flow direction is changed
H Occasionally there is a tick" sound ng noise from nside the unit after stopping the operation.
This is not a disorder, but the norma noise when the drain valve
IS
opened and closed.
