ALINKER R-volution Large, Руководство пользователя

Страница: 26 / 28

26
Step 6
1. Put back the tube into the tire. The valve must
come straight out of the hole in the rim.
2. Tighten the rim nut a few turns.
3. Tighten the valve.
4. Pump up the tube a little to prevent the tube
coming out of the tire.
5. Put the tire at its place. Use your hands for this.
• When using tire levers there is a big chance
that they cause a puncture.
• Make sure that the tube does not get jammed
between the tire and the valve.
• Press the valve a bit towards the tire and
back again. This will make the tube move into
the tire.
6. Pump up the tire. See table 2 for the maximum
tire pressure.
Caution: for pumping up the tires
the pump must be suitable for car
valves.
Tire Maximum tire pressure (bar)
Front tire 2.5
Rear tire 2
Table 2 Tire pressure
Maintenance