18
6.12.TX Prohibit
TX ON: Will allow transmit on the current channel.
TX OFF: Will not allow transmit on the current channel.
6.13.Radio ID
In Digital channel, it will show the DMR ID which must be programmed in the PC
software – Digital – DMR ID list- DMR ID. Allows to edit and select an ID for the
channel, each channel allows one ID.
In Analog channel, it will show the radio self-ID which is programmed in PC software –
Analog –Analog Address Book – Number.
6.14.Color Code
The digital channel should have the same color code for communication as defined
by the repeater to be used; which can be programmed in the PC software or defined
in the Menu.
6.15.Time Slot
Set up Slot 1 or Slot 2 for the current channel.
6.16.Digi Encrypt
With the digital encryption, the communication will be confidential. A total of 32
digital encryptions is offered, and it can be programmed in the PC software or
defined in the Menu.
6.17.Enncrypt Type
There are 2 levels of Encryption for voice.
Normal type:
Enhance Type
6.18.RX Group List
It will allow to edit the RX Group List and assign a new RX Group List to the channel.
Select Cur List: Select the current RX Group List. Add Group: Add a TG to the current
RX Group List. Remove Group: Remove a TG from the current RX Group List.
6.19.Work Alone
In the PC software – Public – Alarm settings – Work Alone, you have to set up the
response time, warn time and response method initially.
Turn on the work alone function for the current channel. When the radios
predetermined time has been reached for the alone working time, the radio will beep a
sound and show “Work Alone Predict”. The user has to confirm by pushing the
programmed work alone key to confirm continuing work alone, otherwise, the radio
will start its alarm and send the alarm on the channel when reaching its preset response
time
6.20. SMS Forbid
Forbid to receive message when this function turned on. User still able to send out the
message.
6.21.Data ACK Forbid
Data feedback forbid such as received the message with reply.
6.22.DMR Mode
Simplex: Enable to communicate by repeater frequencies directly with another radio
with opposite TX/ RX frequencies.
Repeater: Enable talk with other radio by repeat frequency through repeaters.
Double Slot: When TX/RX frequency is same, turn on this function to communicate
by the slot set in simplex mode.
Note: If in the DMR Double Slot mode is not chosen, the radio will work on Slot in
repeat mode. If choose Double Slot, it is necessary to Double choose a slot by time slot
setting.
