Alinco DR-CS10 Скачать руководство пользователя страница 3

Handling this product

 

About power-supply:

Be sure to reduce the audio output level before operating. Excessive audio 

may damage hearing.

Do not open the unit without permission or instruction from the manufacturer. 

Unauthorized modification or repair may result in electric shock, fire and/or 

malfunction.

Do not operate this product in a wet place such as shower room. It may 

result in electric shock,  fire and/or malfunction.

Do not place conductive materials, such as water or metal in close proximity 

to the product. A short-circuit to the product may result in electric shock, fire 

and/or malfunction.  

Do not touch the heatsink (on/around the unit mostly found on mobile-base 

units) as it may become very hot during/after the operation that may risk burn 

your skin.

Use only appropriate, reliable and certified power supply of correct voltage 

and capacity.

Do not connect cables in reverse polarity. It may result in electric shock,  fire 

and/or malfunction.

Do not plug multiple devices including the power-supply into a single wall 

outlet. It may result in overheating and/or fire.

Do not handle a power-supply with a wet hand. It may result in electric 

shock.  

Securely plug the power-supply to the wall outlet. Insecure installation may 

result in short-circuit, electronic shock and/or fire.

Do not plug the power-supply into the wall outlet if the contacts are dirty and/

or dusty. Shortcircuiting and/or overheating may result in fire, electric shock 

and/or damage to the product.

 

In case of emergency

In case of the following situation(s), please turn off the product, switch 

off the source of power, then remove or unplug the power-cord. Please 

contact your local dealer of this product for service and assistance. Do not 

use the product until the trouble is resolved. Do not try to troubleshoot the 

problem by yourself. Unauthorized repair voids warranty.

 

When a strange sound, smoke and or strange odor comes out of the 

product.

 

When the product is dropped or the case is broken or cracked.

 

When a liquid penetrated inside.

 

When a power-cord ( including DC-cables, AC-cables and adapters) is 

damaged.

 

Maintenance

Do not open the unit and its accessories. Please consult with your local 

dealer of this product for service and assistance.

Do not modify or remove fuse-assembly from the DC-cable. It may result in 

fire,electric shock and/or damage to the product.

For your safety, turn off then remove all related AC-lines to the product and 

its accessories including the antenna if a thunderstorm is likely.

WARNING

Содержание DR-CS10






































Отзывы: