36
ADVANCED OPERATIONS
Squelch level
This function is used for setup intensity of receiving signals, transceiver will hear calls when receiving
signal intensity achieve preset data, otherwise, transceiver will keep mute.
1. Press
key, the top left corner of LCD displays " " icon, then press
key.
2. Press
/
key to choose menu 23 and display "
SQL
".
3. Rotate channel switch to choose desired setup.
00~09:
10 levels of squelch in total for optional, “00” is minimum setup value
(normally open)
4. Press
key or
key to confirm and exit.
Scan Dwell Time
There are three kinds of scan dwell time for optional.
1. Press
key, the top left corner of LCD displays " " icon, then press
key .
2. Press
/
key to choose menu 24 and display "
SCAN
".
3. Rotate channel switch to choose desired setup.
5ST:
When scanning matched signal, transceiver will stop scaning for 5seconds
then resume.
10ST:
When scanning matched signal, transceiver will stop scaning for 10seconds then resume.
15ST:
When scanning matched signal, transceiver will stop scaning for 15seconds then resume.
2SP:
When scanning matched signal, transceiver will stop scaning, 2seconds after signal disappeared,
then resume.
4. Press
key or
key to confirm and exit.
