R0368
Cod. R0368 ‐ rev.1.0
(03/2020)
Page 14/14
6.2
Horizontal/vertical angles
reading testi
The screen shows all the angle readings from the
detectors divided into 5 blocks as follows:
1‐
Alignment angles (see Figure 27);
2‐
Convergence angles;
3‐
Front level gauge and inclination
4‐
Rear level gauge and inclination
5‐
All levels with tolerance
Figure 26
Pressing the F5 key displays a figure with a
graphic representation of the meaning of the
various angles (see Figure 21).
Press F1 to exit.
Figure 27
6.3
Encoder test on detectors
The screen shows the readings of the angular
transducers (encoders) mounted on the detector
pins. Turning the pin, it is possible to check that
the value read corresponds to the rotation angle
made (see Figure 28).
The F5 key or grey key on the detector is used to
reset the value indicated on the screen.
ATTENTION: The
CCD2.0WiFi models have the
angular transducer (encoder) mounted only on
the rear right detector.
Figure 28
6.4
Test Keypads
The keypads of the 4 detectors are shown on the
screen. If a key is repeatedly pressed, the one
associated on the screen is coloured and de‐
coloured alternately (see Figure 29).
Press the F1 key on the PC keyboard to exit.
Figure 29
