USER’S MANUAL
2-1
2
Network Adapter Problems
The Ethernet adapter does not work –
n
Go to [Start > Settings > Control Panel > System >
Hardware > Device Manager]. Double-click on Network
Adapters and check if Intel PRO/100 VE Network
connection PCI Fast Ethernet Adapter appears as one
of the adapters. If it does not exist, Windows has not
detected the Intel Ethernet adapter or the device driver
has not been installed properly. If there is a yellow mark
or red cross on the Intel network adapter, there may be
a device or resource conflict. Replace / update the
device driver from the factory CD-ROM disk or consult
Windows manual on how to solve this problem.
n
Make sure the physical connections on both ends of the
cable are good.
n
The hub or concentrator may not be working properly.
Check to see if other workstations connected to the
same hub or concentrator are working.
The Ethernet adapter does not appear to operate in the
100Mbps transmission mode –
n
Make sure the hub you are using supports 100Mbps
operation.
n
Make sure that your RJ-45 cable meets the 100Base-TX
requirements.
n
Make sure the Ethernet cable is connected to the hub‘s
socket that supports 100Base-TX mode. The hub may
have both 100Base-TX and 100Base-T sockets.
PC Card (PCMCIA) Problems
PC Cards do not function -
n
Make sure you have properly installed the driver for the
card.
n
Consult the card’s manual or contact the vendor for
trouble-shooting.
