For your safety, and to protect the sensitive electronic components in your computer, you are requested to drain residual flea power
before removing or replacing any components in your computer.
Draining residual flea power, also known as a performing a "hard reset", is also a common troubleshooting step if your computer does
not power on or boot into the operating system.
To drain residual flea power (perform a hard reset)
Steps
1. Turn off your computer.
2. Disconnect the power adapter from your computer.
3. Press and hold the power button for 20 seconds to drain the flea power.
4. Connect the power adapter to your computer.
5. Turn on your computer.
NOTE: For more information about performing a hard reset, see the knowledge base article
.
Modern Standby
What is Modern Standby
Alienware Aurora Ryzen Edition R14 supports Modern Standby. It is a power model that uses a gradual process to turn off
components of the computer. This process allows for a quicker transition between sleep and resumption of normal operation of the
computer.
For more information about the Modern Standby mode, see the following:
●
What is Modern Standby and how does it differ from S3 Standby
?
●
●
●
97