Aliencopter Quad's Flyman, Руководство пользователя

Страница: 5 / 31

Aliencopter Studio All Rights Reserved. www.aliencopter.com
5
/
31
Product Usage Cautions
The ALIENCOPTER FLYMAN is not a toy and should beoperated with extreme care, as improper operation can
cause serious personal injury and damage to property. When flying, the fast rotating propellers may cause serious
damage(s) and injuries. Therefore, please fly with a high safety in mind at all time.
The ALIENCOPTER FLYMAN should not be flown over or around people, power lines or other aircraft. It is
important to always check The ALIENCOPTER FLYMAN and its components prior to operation. Always
maintain a safe distance fromThe ALIENCOPTER FLYMAN when in use. Never attempt to touch it when the
propellers are moving. As with any multi-rotor helicopter, The ALIENCOPTER FLYMAN is a complax and
technical machine. Novice pilots should invest sufficient time on a flight simulator and seek training from an
experienced pilot prior to operation. A flight simulator is nosubstitute for training with an experienced pilot,
particularly when it comes to learning how to safely operate The ALIENCOPTER FLYMAN. Novice pilots should
never fly without the supervision of an experienced pilot.
Always remove the props when you are making a change to the configuration of The ALIENCOPTER FLYMAN.
Always test The ALIENCOPTER FLYMAN with the props removed to make sure that the motors are spinning in
the correct direction and that the motor assignment is correct with respect to your flight control board. If you have
either of these wrong. The ALIENCOPTER FLYMAN will be uncontrolled and dangerous.
Aliencopter studio disclaims all warranties, whether express or implied, including but not limited to the implied
warran-ties or merchantability and fitness for a particular purpose. Airtechno does not assume any liability,
whether direct, indirect, special, incidental, punitive, contingent or consequential damages to persons or property
caused by The ALIENCOPTER FLYMAN. In no event shall Airtechno be liable for personal injury up to and
including
death.
It’s your responsibilty to perform a full system check of The ALIENCOPTER FLYMAN prior to flight. As
Aliencopter Studio can not control every operations of the users, like assembly, final assembly, refit or
inappropriate operation, the follow consquences or damages caused by above actions have nothing to do with
Aliencopter Studio. It’s your responsibilty to learn how to safely operate The ALIENCOPTER FLYMAN and to
adhere to all applicable rules and regulations. Fly at your own risk
Assembly Cautions
(1) Mount the GPS Module with a bracket, to avoid interference with the power board of main frame.
(2) For IMU mounting, make sure the arrow direction marking on the IMU is pointing to the aircraft nose.
(3) The receiver is strongly recommended to be attached under the bottom board of center frame, and the Head of
antenna is downward without any obstacle. Otherwise the aircraft may be out of control, since the wireless
signal may be lost.
(4) Mount the arms correctly.
a) front Arm installed in front frame
b) back Arm installed in back frame
(5) For removing screws in the bottom board, please proceed with cautious, avoiding damages. Do not remove
any other screws fixed with glue.
(6) Notice matching the indications is very important, please pay attention to them.