Aliencopter Quad's Flyman, Руководство пользователя

Страница: 23 / 31

Aliencopter Studio All Rights Reserved. www.aliencopter.com
23
/
31
Install The Lipo Bartty
The main purpose of installing the LiPo battery is to adjust the center of gravity of the whole frame and try to keep
the frame’s center and its center of gravity overlapped on the back frame. Therefore, LiPo battery installation
should be the last step of the whole frame assembly, which
can only be done with all the wires and equipment installed
and Gopro Hero camera tuned. As shown in the image on
the right, the red arrows indicate the screws that need to be
loosed, which help tuning the back-and-forth position of
battery after installation. The image below shows the
innermost of the 25mm carbon-fiber tube, and the
outermost end located two rows of retaining plates
。
The
battery we used for testing and tuning is 4S 5800mah LiPo
battery. Once the battery reaches the balancing point, you
can adjust the height of the upper retaining plate, as the
following image shows.
Install Gimbal Control & Power Supply Hub
How to use it as the following image shows.
How to install it inside to the Flyman frame as the following image shows.