1
www.observint.com
ALI-TS1112R_CQ
190916
What’s in the box
•
Camera assembly
•
Mounting hardware
•
Drill template
•
This instruction guide
Tools you need
To install the camera, you will need:
•
12 Vdc power source. See
Specifications
for voltage and wattage requirements.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Video and power extension cable
•
HD-TVI video setup monitor (optional)
Before Installation
•
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
provide the rated voltage and wattage for the camera. See the
Specifications
section.
During Installation
•
Camera Lens
: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or IR
array shield becomes soiled, clean it only with approved products. See the
Cleaning
section.
•
Monitor impedance
: Set the monitor impedance switch to 75 Ω.
•
Power supply
:
Camera drop cable
: The camera drop cable includes two connectors:
—
Button Switch
: Reserved for future use.
—
Video BNC connector
: For transmission of the HD-TVI video signal across a coax (75 Ω)
extension cable.
—
Power connector:
When applying Vdc power, observe the power polarity. See the picture to the
right for connector polarity configuration.
Step 1. Camera installation
1.
Unscrew the bezel from the mounting base, and then lift it off of the camera.
2.
Separate the housing and the camera module from the mounting base.
ALI-TS1112R 2MP HD-TVI 65 ft IR
Outdoor Turret Camera
Quick Installation Guide
The ALIBI™ ALI-TS1112R camera features a 2.0 MP high-performance CMOS sensor with Starlight
Technology that delivers high quality 1080p HD video in low light conditions. HD-TVI technology transmits
zero latency HD video resolution over coax cabling. Its features include:
•
2MP CMOS image sensor
•
HD-TVI technology with 1080p video
•
2.8 mm lens with 103.5° field of view
•
65 ft SMART IR with Starlight Technology
•
-40 °F ~ 140 °F extreme temperature operating range, IP67 weather-rated housing
•
Up the coax OSD
•
Requires Alibi HD-TVI compatible recorder (HD-TVI DVR)
•
Compatible with these accessories: ALI-AA2 Corner mount adapter, ALI-AB1 Short Wall Mount
Bracket, ALI-AB2 Wall Bracket with J Box, ALI-AB3 Ceiling Pendant Mount Bracket, ALI-AF1 Flange
Plate, ALI-AJ1 Round Junction Box, ALI-AJ6 Mini Junction Box, ALI-AB5 Wall Mount Bracket.
Mounting
base
Cable
guide
Bezel
Orientation
mark (UP)
Enclosure
Camera
module
Lens
IR LED
ALI-TS1112R camera
Hole for
mounting
screw (3)
Encloser separated from Mounting base
Power
Connector
HD-TVI video
BNC connector
Button switch
*
Camera drop cable connectors
*
Button switch
is reserved for future enhancements.
