4
www.observint.com
© 2019 Observint Technologies. All rights reserved.
Run as
administrator
To login to the camera from a computer on the same LAN:
1.
Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of the
camera in the URL field. In the example below, the IP address of the camera is 192.168.0.7.
2.
In the login window, enter
admin
for the
User Name
and the password you created in the
Password
field, the click
Login
.
3.
If this is the first time you are logging into a camera, you may see the message in the following
screen. If this appears, follow the sub-steps below.
a.
Click on the message to install the plugin.
b.
In the message bar at the bottom of the screen, click
Run
. Follow the on-screen instructions
to install
WebComponents
. When the following screen opens, click
Finish
.
The Live View screen with the camera video image should appear.
Capture, Record, Zoom icons
Screen select tabs
Logout button
Live View image
Step 8. Adjust camera pan, tilt and rotation
Adjust the camera pan, tilt and rotation to point the camera at your surveillance target. When pointing the
camera, use the
Live View
display on a recorder or remote login.
Camera adjustments
4.
While observing video from the camera, loosen the mounting bracket pan lock nut, and elevation
and horizontal line adjustment lock screws, point the camera at your surveillance target, and then
tighten adjustment lock screws and nut to hold the camera in position.
0° ~ 180°
0° ~ 360°
0° ~ 360°
Rotation: Use for horizon
line adjustment
Pan lock
nut: loosen
for pan
adjustment
Tilt: Use for
elevation
adjustment
5.
Ensure the lens is clean and dust free.
6.
Refer to the recorder or camera firmware user manual for configuration adjustments to the camera.
Specifications
Camera
Image Sensor
1/3” progressive scan CMOS
Min. Illumination
Color: 0.01 Lux @ (F1.2, AGC ON), 0.028 Lux @ (F2.0, AGC ON)
Shutter Speed
1/3 s ~ 1/100, 000 s
Slow Shutter
Yes
Auto-Iris
No
Day & Night
IR cut filter
