1
www.observint.com
ALI-NP3013RH_CQ
181128
Top (up)
Bottom (down)
Conduit port (2)
Mounting screw
hole (4)
Hook for safety
cable
Hole for camera
mounting screw (4)
Cable access
through mounting
surface
Camera base
locator pins
Junction box detail
What’s in the box
Your camera includes the following items:
•
Drill template
•
Waterproof RJ-45 LAN coupling
•
Junction Box
•
Gang box adapter plate (not shown)
•
Security wrench
•
Mounting hardware
•
Waterproof LAN coupling
Step 1. Determine the camera mounting location
This License Plate Recognition camera will produce the best results when positioned and aimed correctly.
Use the information in this step, and then carefully plan for the installation following the guidelines shown
here and the instructions later in this document.
General Guidelines
•
Environment
: The camera should not be blocked from its surveillance targets by vegetation,
structures, or other obstructions.
•
Sunlight
: Direct sunlight can distort the image detected by the camera.
•
Installation angle
: The vertical and horizontal angles should not exceed 30º. See the diagrams
below.
30º
X
H
Y
30º
NOTE
For computational purposes, the recognition distance (minimum to maximum) is a combination of the vertical
height (
H
) of the camera and the horizontal offset (
Y
) of the camera from the motion vector of the vehicle.
Lens specification: 8 mm to 32 mm, F1.6, horizontal field of view: 42° to 13.5°.
ALI-NP3022ANPR 2 MP IP Bullet
License Plate Recognition Camera
Quick Installation Guide
This document guides you through the basic steps to install and configure the ALI-NP3022ANPR camera.
This camera uses optical character recognition on images to read vehicle license plates and create vehicle
data. The camera features:
•
2.0 MP high resolution sensor, 1920 × 1080 @ 60 fps
•
8 - 32 mm motorized vari-focal lens
•
Smart IR LED array with illumination up to 165 feet
•
3D-DNR noise reduction, 120dB Wide Dynamic Range (WDR)
•
Dual power capable - Power over Ethernet (PoE) or 12 Vdc
•
Weatherproof - IP67 rated
•
Internal microSD card storage up to 128GB (card not provided)
•
2-way Audio I/O, Alarm I/O
For more information about the software features of this camera, please refer to the
ALIBI IP Camera V3
Software User Manual,
available from your retailer.
Camera body
Lens
Articulated
mounting
bracket
Junction box assembly
(see detail below)
Sun Shield
Camera mounting base
Safety cable
Audio In/Out
connectors
LAN (RJ-45)
connector
12 Vdc,power
and ground
terminations
CVBS Out
Alarm In/Out
terminals
microSD card slot and reset button inside.
