1
www.Observint.com
ALI-NP1018VHP_CQ
108403
Tilt lock
screw
Holes / slots
for mounting
screws (4)
Camera top view without dome assembly
RS-485
network
terminations
(D+, D-)
Alarm
terminations:
IN, G: Alarm Input,
1A, 1B: Alarm Output
Audio In,
Audio Out
RJ-45 LAN
connector
12 Vdc in
(+, , -)
Camera drop cable connectors
What’s in the box
This product includes the following items:
•
Drill template
•
Security L-wrench
•
Mounting hardware
•
Weatherproof fitting for Ethernet cable
•
This Quick Installation Guide
Step 1. Install the camera on a surface
1.
Determine the best fasteners for securing the camera to mounting surface. Make sure that the wall
or ceiling is strong enough to withstand four times the weight of the camera and any brackets used
with it. The mounting hardware provided is suitable for many surfaces.
ALI-NP1018VHP 7.3MP 4-Sensor
Panoramic IP Dome Camera
Quick Installation Guide
This document guides you through the basic steps to install the ALI-NP1018VHP camera hardware. These
cameras feature:
•
Resolutions up to 4096 x 1800 pixels, 7.3 Megapixels
•
Low light .002 Lux color
•
DC driven auto iris
•
Backlight compensation, defog,
•
Video stream compression: H.264 standard, H.264 OVC (optimized video CODEC) and MJPEG
•
3D-DNR noise reduction and Digital Wide Dynamic Range (WDR)
•
Multi-power capable - Power over Ethernet (PoE),
12 Vdc
•
Weatherproof - IP66 rated and vandalproof - IK10 rated
For more information
, refer to these documents - available from your equipment vendor:
•
ALIBI™ IP Camera Firmware Version x.x User Manual
provided at
www.alibisecurity.com/resources
.
•
ALIBI™ Tools Utility Installation and User Manual
•
ALIBI™ Witness and ALIBI™ Witness HD Apps for Android - Quick Start Guide
Cable channel
Mounting
base
Dome
Assembly
Dome
cover
screws (4)
Lens (4)
Drop cables
Focus
adjustment
Gimbal
mounted
camera
module
microSD
card slot
Reset button
Cameras without the dome cover
