Alibaba Cloud SAG-1000, Руководство по настройке

Страница: 17 / 23

Smart Access Gateway SAG-1000 Configuration Guide / 3 Web configuration
3.3 Step 3: Configure the service IP and the administration IP
After you configure the user name and password and log on to the web configuration
page, you can configure the service IP and administration IP of the gateway device.
Port 2 is the administration port by default.
Procedure
1. On the web configuration page, click Service IP Configuration.
2. Configure the service IP and administration IP according to the following
information, and then click OK.
Configuration Description
Service IP The service IP is used to establish the VPN tunnel.
Notice:
Make sure that the specified service IP can access the
Internet. For one-arm mode, you must enable NAT mapping
at the Internet egress.
Administration
port The administration port is used for local web access. Port 2 is
the administration port by default.
Administration IP The administration IP is used for web access of the local
client.
Whether to isolate Select whether to isolate the service port from the
administration port:
• Yes: This port can only be used as a local web
administration port and cannot be used as a service port.
In the isolation mode, the service traffic and the
administration traffic do not affect each other, so higher
security is achieved.
• No: This port is used as both the local web administration
port and the service port.
Next hop If you choose to isolate the service port from the administra
tion port, specify the next hop of the administration port.
Issue: 20190228 9