Alibaba Cloud SAG-1000, Руководство по настройке

Страница: 12 / 23

Smart Access Gateway SAG-1000 Configuration Guide / 1 SAG-1000 overview
The default administration IP address of the Smart Access Gateway device is
192.168.0.1.
- Reset button
You can reset the Smart Access Gateway to its default configurations by pressing
the reset button three times within 10 seconds while the device is powered on.
- USB port
You can use a 4G USB drive to access the Internet.
- Power socket
Located on the left-hand side of the front panel. The power supply must be 12 V
DC.
Note:
We recommend that you use the original power cable.
Networking mode
The SAG-1000 Smart Access Gateway device is connected to the switch through one-
arm mode. This means it can connect local clients to Alibaba Cloud without changing
the current network topology.
4 Issue: 20190228