CUSTOMISATION
The Easyfit VEE DN 10÷50 valve is set for the customisable Labelling System.
This system lets you create special labels to insert in the handle. This makes it ex-
tremely easy to apply company logos, identification serial numbers or service indica-
tions such as, for example, the valve function in the system, the transported fluid, but
also specific information for customer service, such as the customer name or installa-
tion date or location on the valves.
The grey protection plug (A) housed on the handle can be replaced with the specific
LCE accessory module.
This module is made up of a rigid transparent water-resistant PVC plug (B) and white
tag holder (C) made of the same material, one side of which bears the FIP logo (fig.
2).
The holder, inserted in the plug, can be removed and, once overturned, used for cus-
tomisation by applying labels printed with the software supplied with the LSE set.
Proceed as follows to apply the label on the valve:
1) Extract the handle from the valve body and extract its grey plug (fig. 1)
2) Apply the adhesive label on tag holder included in the LCE set to align the pro-
files matching the tab position.
3) Insert tag holder in the transparent plug so that the label is protected from the
elements.
4) Apply the transparent plug on the handle matching the two fittings (one narrow
and one wide) with their housings (fig. 3).
Fig. 1
Fig. 2
Fig. 4
Fig. 3
A
B
C
111
www.npvequipment.co.th
Electric
Documents
