20
2375 ·
Stand/Update: 03.2021
EN
6.
Disassembly of the scraper tool
fig. 6
• For disassembling hold scraper tool
by gripping the central ball hand-
hold
(4) with one hand and using
the other hand to release the
clamping lever
(3) (see fig. 6).
fig. 7
• Pull the scraper tool off the pipe
(see fig. 7).
• After use, store the tool in the
transport box.
7.
Inspection of the scraping result
Inspect the scraping result, i.e. the swarf must be completely removed and the
markings applied before with the FRIALEN marker may no longer be visible.
For bundled coil pipes control the scraping result with regard to the swarf thick-
ness or remained marks on the pipe very carefully.
If the marker lines are not completely removed, the scraping process should be
repeated.
