ALI Champion CH-44 Скачать руководство пользователя страница 9

Страница: 9 / 104

Installation

! ATTENTION !
Use caution

when moving or lifting the dishwasher to prevent damaging the dishwasher

or the installation site.

Check doorway and passageway clearance before moving the dishwasher.

Remove dishwasher front panels and check under the machine base for obstructions before moving.

1. Inspect the dishwasher for shipping damage.
2. Check the dishwasher interior for

curtains, panels and other supplies.

3. Lift the dishwasher off the shipping pallet

and move the machine near its

permanent location.

4. Leave a minimum of 6" between walls

and the rear of the dishwasher.

5. Level the dishwasher side-to-side and

front-to-back using a bubble level.

The dishwasher legs are adjusted by

screwing them in or out.

6. Do not remove tags attached to the

utility connections.

7. Remove the protective film from the

dishwasher exterior.

8. Remove any foreign material from the

dishwasher interior.

Receiving

Wall Clearances

1.  Inspect the outside of the dishwasher carton for signs of damage.
2.  Remove the carton and inspect the dishwasher for damage.
3.  Check for any options or accessories that may have shipped with your dishwasher.

4. Turn to the front of this manual and follow the instructions to register your

product online or by fax.

NOTE:

The installation of your dishwasher must be performed by qualified service personnel.

Problems due to improper installation are not covered by the Warranty.

NOTE:

The installation of the dishwasher must comply with all local electrical, plumbing, health and

safety codes or in the absence of local codes, installed in accordance with the applicable

requirements in the National Electrical Code, NFPA 70, Canadian Electrical Code (CEC),

Part 1, CSA C22.1; and the Standard for Ventilation Control and Fire Protection of

Commercial Cooking Operations, NFPA 96.

Содержание Champion CH-44









































































































Результаты поиска

Содержание Champion CH-44

Отзывы:

Похожие инструкции для Champion CH-44

Бренды по названию

Популярные бренды

ALI Champion CH-44, Руководство по установке и эксплуатации с перечнем запасных частей для сервисного обслуживания

Результаты поиска

Содержание Champion CH-44

Отзывы:

Похожие инструкции для Champion CH-44

Бренды по названию

Популярные бренды