Algocraft WN-PRG01A, Руководство пользователя

Страница: 29 / 72

WriteNow! User's Manual
29
Data In/Out Commands
Syntax
#data –o set –c <direction> -t file –f <filename>
#data –o set –c <direction> -t volatile
#data -o set -c in -t file -f \images\myimage.wni -s MD5
#data -o set -c in -t file -f \images\myimage.wni -s CRC32
Parameters
<direction> in or out .
<filename> F
Description
Specify the source and destination of the programming data.
Examples

Sets the input image file to be programmed, and subsequently programs it:
#data -o set -c in -t file -f \images\myfile.wni
>
#prog -o cmd -c program -m flash -s h8000 -t h8000 -l h8000
>
If you add the "-s MD5 | CRC32" flag, the programmer check the full-integrity of the wni file
and returns an error in case of wrong integrity.

Sets the output file to receive binary data, and subsequently reads data from the target
device:
#data -o set -c out -t file -f \images\dump.bin
>
#prog -o cmd -c read -m flash -s h8000 -t h8000 -l h8000
>
http://smh-tech.com.cn http://algocraft.com.cn sales@smh-tech.com.cn +86-15250087885