Algo 8180, Руководство пользователя

Страница: 5 / 51

- 5 -
Blue Indicator Light
This LED light is on during initialization, boot, message waiting or while
active. Ring and Page modes, when active, will turn the LED on steady. If
the optional Talkback mode is enabled, the LED will flash instead (during
a page event) to provide a clear indication that the microphone is active.
If Message Waiting is supported and active, the light will flash, or be
on steady (depending on its setting). The LED heartbeat option, when
enabled, will flash the LED every 30 seconds as visual confirmation of
PoE power and SIP server registration.
SIP Extensions
The 8180 connects to an on-premise or hosted communication server in
the same way as a SIP telephone. To register the 8180 with the server
requires the following information:
1. IP address (eg 192.168.1.1) or domain name (eg myserver.com) of
the SIP Server
2. SIP extension (eg 3790)
3. Password
The 8180 supports two SIP extensions which behave differently – RING
and PAGE. One or both may be used depending on the application. If the
RING extension is called the 8180 will not answer. Instead it will play the
selected WAV file until the ringing stops. Typically the RING extension
is programmed as part of a hunt group so that it receives ring signal
simultaneously with one or more phones to function as a loud ringer in
noisy or large areas.
If the PAGE extension is called, the 8180 will answer and allow
paging over its internal speaker. When the 8180 answers it will play
a configurable tone to the caller so they know when they can begin
speaking. A pre-announce tone is also sent over the speaker. If Paging to
a single 8180, talkback may be enabled using the integrated microphone.
The audio direction is determined by the speech activity of the caller.