Document 90-00066
Algo Communication Products Ltd
(604) 454-3792
2014-02-20
4500 Beedie St Burnaby BC Canada V5J 5L2
Page 26
www.algosolutions.com
One of two files can be uploaded on the Provisioning Server (for access via
TFTP, FTP, or HTTP):
1. generic file algop8128.conf, or
2. specific file algom[MAC].conf
MD5 Checksum
In addition to the .conf file, an .md5 checksum file must also be uploaded
to the Provisioning server. This checksum file is used to verify that the .conf
file is transferred correctly without error.
A tool such as can be found at the website address below may be used to
generate this file:
The application doesn’t need an installation. To use the tool, simply unzip
and run the application (md5) from a command prompt. The proper .md5
file will be generated in the same directory.
If using the above tool, be sure to use the “-l” parameter to generate
lower case letters.
Generating a generic configuration file
1.
Connect an 8128 to the network
2.
Access the 8128 Web Interface Control Panel
3.
Configure the 8128 with desired options
4.
Click on the System tab and then Maintenance.
5.
Click “Backup” to download the current configuration file
6.
Save the file settings.txt
7.
Rename file settings.txt to algop8128.conf
8.
File algop8128.conf can now be uploaded onto the Provisioning
server
If using a generic configuration file, extensions and credentials have to be
entered manually once the 8128 Strobe has automatically downloaded the
configuration file.
