![Algo 8036 Скачать руководство пользователя страница 55](http://html1.mh-extra.com/html/algo/8036/8036_installation-configuration-manual_2896140055.webp)
8036 SIP Multimedia Intercom (FW 1.5.1)
Document 90-00081
Algo Communication Products Ltd
(604) 454-3792
2017-05-11
4500 Beedie St Burnaby BC Canada V5J 5L2
Page 55
www.algosolutions.com
DHCP must be enabled if using DHCP Option 66/160/150, in order for
Provisioning to work.
One of two files can be uploaded on the Provisioning Server (for
access via TFTP, FTP, HTTP, or HTTPS):
Generic (for all 8036 SIP Multimedia Intercoms)
algop8036.conf
Specific (for a specific MAC address)
algom[MAC].conf
Both protocol and path is supported for Option 66, allowing for
http://myserver.com/config-path
to be used.
MD5 Checksum
In addition to the .conf file, an .md5 checksum file must also be
uploaded to the Provisioning server. This checksum file is used to
verify that the .conf file is transferred correctly without error.
A tool such as can be found at the website address below may be
used to generate this file:
http://www.fourmilab.ch/md5
The application doesn’t need an installation. To use the tool, simply
unzip and run the application (md5) from a command prompt. The
proper .md5 file will be generated in the same directory.
If using the above tool, be sure to use the “-l” parameter to generate
lower case letters.
Generating a generic configuration file
1.
Connect 8036 to the network
2.
Access the 8036 Web Interface Control Panel
3.
Configure the 8036 with desired options
4.
Click on the System tab and then Maintenance.
5.
Click “Download” to download the current configuration file
6.
Save the file settings.txt
7.
Rename file settings.txt to algop8036.conf
8.
File algop8036.conf can now be uploaded onto the Provisioning
server