ALGE-Timing OPTIc3, Руководство пользователя

Страница: 50 / 121

Manual
Photo Finish OPTIc3
- 50-
8.3.3.9 Export an Image
This function is available on request and allows making adjustments for the picture
export.
8.3.3.10 Download License File
If you use an OPTIc3 and buy a software upgrade (e.g. eXtrem LuX) you have
to update the license file in order to use the new function.
8.3.4 Menu <Connection>
8.3.4.1 IDCam
See point 16 Integration of IDCam.
8.3.4.2 ALGE-TIMING Display Board
to activate different modes of the
ALGE-TIMING
display board (D-LINE or GAZ)
Run time
The running time of the active race is shown on the display board. Further adjustments
are possible in the time window.
Time of Day
The display board shows the time of day (hours and seconds).
Hold time
You can adjust in seconds how long the stopped time is shown on the display board after
a finish impulse (if you select the automatic mode in the time window).
Shift day time
to adjust the time of day format on the display board
This function must be activated to show the time of day correctly on a 6-digit display board.
Brightness
to adjust the brightness of a D-LINE display board
The value ranges from 0 (dark) to 9 (bright).
Board type
You can switch the output protocol for display boards between
ALGE-TIMING and OMEGA protocol
(factory setting: ALGE)
Two Display Boards connected:
It is possible to connect two display boards to the OPTIc3. The first display board (address 0)
will show the running time until a stop impulse comes. The time stops now. The second display
board (address 2) shows only in the standard mode (see paragraph 10) when the first dis-
play is stopped the running time.