ALGE-Timing OPTIc2, Руководство пользователя

Страница: 48 / 88

Photofinish OPTIc2.NET
Page 48
10 Timing (Timing Window)
Before you start a race you should start the timing window with the heat that you want to start
and execute the timing. It is possible to start several heats in the timing window (e.g. for row-
ing events when more races are on the water at the same time).
•
Before you start a race you need to establish a race structure in the meet browser (see
chapter 13 Meet Browser).
•
Double click on the heat that you want to open in the meet browser.
•
The timing window comes up showing the selected heat.
•
If the bar of a heat in the Timing window is yellow (see below), it means that you show the
picture of this heat in the Overview window, View 1 window and View 2 window. Other-
wise the bar is light blue.
Start
When you click on this button it changes to another icon. Each icon has a different function.
Start is ready. The starter can start this heat at any time.
Start is blocked. If you receive a start impulse the time does not start.
Race is started
To make a false start (reset the race so another start is possible). This icon is only
shown if you move the mouse over the icon
Display
With this function you select the display board. If more than one started heat is active in the
<Timing> window you have to select which time of the two heats you want to show on the
display board. In case you have only one race started you can blank the display board by
clicking on this icon.
Display board (GAZ or D-LINE) is active for this heat. In the field <Display time> the
time is shown like it is shown on the
ALGE
display board.
Display board (GAZ or D-LINE) is inactive for this race. If no other race has the focus
the display is blank.