Alga Science SOLARCOASTER, Руководство пользователя

Страница: 5 / 19

English English
1
comPonents
1. 1 x Base
2. 2 x Rail
3. 7 x Step 4. 4 x Ball
5. 1 x Gearbox
6. 1 x Solar panel 7. 1 x Solar panel holder
8. 2 x Wheel
9. 4 x Stair part 10. 2 x Step support
2
assemblIng your solar roller coaster
3
4
5
6
7
8
• As shown in Fig. 2, install the steps (3) no. 1 to 6 to the two step support (10). Each step has a number
marked inside the top, insert the one to the step support marked with the same number.
• Install the front and rear panels of the step support (10) to the side with poles and gears as shown in
Fig. 3. Note that the small rectangular piece at the base of the front and rear panel should face inward.
Also attach the step (7) marked with “0” to the slit near the top of the side panel, as indicated with a
blue arrow in the figure.
• Install the step support (10) assembled in fig. 2 (with the odd number steps) to the stair part assembled in
fig. 3. As shown in Fig. 4, the step support (10) should slide smoothly on the ridge of the side panel.
• Insert the two wheels into the poles of the side panel as shown in Fig. 5. Note the pins at the rim of the
wheels and the flat side of the holes must be positioned as shown in the figure. The number side of the
wheels should also face inwards for it to fit into the semi-circular hole below. If you do it right, the steps
should move up and down while you turn the wheels manually.
• Insert the remaining half of the step support (with the even number steps) over the wheels as shown in
Fig. 6.
• Install the other side panel to complete the set of steps. (Fig. 7)
• Attach the gearbox (5) next to the gears on the side of the stair as shown in Fig. 8.
Colours and contents may vary