background image

\ÇáàtÄÄtà|ÉÇ `tÇâtÄ

DIGITAL PROGRAMMABLE TIMER

   

 

 

 

Electrostatic Discharge:

 The inputs and outputs can be damaged by 

electrostatic discharge, thus care must be taken when handling the 
electronic circuit boards. Failure to observe proper handling and 
installation procedures can cause damage. Electrostatic Discharge damage 
can range from performance degradation to complete product failure. 

Important Safety Instructions 

Please follow these precautions when using this product: 

Read these instructions. Keep these instructions. Heed all warnings. Follow 
all instructions. 

WATER AND MOISTURE:

 Designed for indoor use only. The product is 

not protected against liquids. It should not be exposed to dripping or 
splashing and no objects filled with liquids, shall be placed on the product. 

INSTALLATION:

 The timer must always be installed by qualified service 

personnel. Install in accordance with the manufacturer's instructions. 
Always disconnect the supply power before installing the unit. Do not 
install near any heat sources such as radiators, heaters, or other 
apparatus that produce heat. 

POWER SOURCES:

 The unit should be connected to a power supply only 

of the type described in the operating instructions or as marked on the 
unit. 

SERVICING:

 Contains no user serviceable parts. Do not attempt to repair 

the product, as this will void the warranty. 

BATTERY:

 This product contains Nickel Metal Hydride batteries. There is 

danger of explosion if the battery is incorrectly replaced. Replace only with 
an equivalent battery as found in the operating instructions. Make sure the 
battery is installed with the correct polarity. Discard used batteries 
according to manufacturer’s instructions or local environmental protection 
guidelines. 

Содержание DPT-Console v. 3.3













Отзывы: