KEG COOLER APPLICATION:
Your
ALFRESCO
refrigerator has been designed with enough interior volume to hold a standard US full size 15 gallon beer
keg. In addition, the refrigerator allows the installation of a beer faucet and support arm that will allow you to serve “Beer-on-
Tap” .
This optional equipment permits you to have an under counter Keg Tap system as well as a movable unit with the optional
caster kit. The Keg kit is very easy to install by following the next steps:
KEG KIT INSTALLATION & COMPONENTS:
KEG KIT COMPONENTS:
A - Support Arm.
B - Beer Faucet [ “TAP”].
C - Single Gauge Pressure Regulator with connector
and shut-off ball valve.
D - Aluminum 2.5 Lbs CO
2
Bottle.
E - CO
2
Pressure line (5/16” ID / BLUE color line)
F - Sanitary Key [“SANKEY”] Standard US - low profile.
G - Beer Line (3/16” ID / CLEAR color line).
Tubing
Clamps.
KEG KIT INSTALLATION:
1. On the back top section of your refrigerator there is an opening provided for the faucet support arm (see pictures 1 & 2).
2. Remove the cap as shown on picture 2 by lifting the cap straight out, exposing the opening.
3. Save the cap for future use.
Picture 1
Picture 2
