ALFRA 2070, Руководство по эксплуатации

Страница: 7 / 12

15
Available hydraulic screws, distance inserts and spacer sleeves
Distance inserts
Prod. No. 02004
Special hydraulic Distanzbuchse
screw
Prod. No. 01395 Prod. No. 01396
Operating time
The device is not suitable for permanent operation. After approx. 40 to 50 punching procedures a break should be
taken of approx. 10 to 20 minutes so the hydraulic punch cools down.
Technical data battery and battery charger
Battery: 18 V; 3,0 Ah NiMH
Charging time: 45 min. after complete discharge
Charging cycles: ~ 500 at normal conditions
Use: 0° bis + 40° C, loosing capacity under 0° C
Battery charger: -charges all batteries between 18 up to 28 V
-compatible for NiCad-, NiMH- and Li-Ion-batteries
-automatic temperature control
-the change between quick charges to conservation charging avoids overloading of the battery cells
-the state of charge will be indicated by LED-indication
-the PCB is completely moulded