SINGLE - LEVER BATHROO
M
FAUCET
*
Installation procedures
1
1.1) Drill a hole of 032-035 on the installation
deck. 2) Screw nut(?) off from bolt(6). 3) Fix
bolt(6) and inlet pipes(8) onto the main body.
3.
3.After adjusting the faucet to desired position,
tighten nuts(?) with a wrench.
4
2.
2.Put base(2) and washer A(3) through the inlet
pipes to main body, then put inlet pipes through
the hole, and install the faucet with washe 8(4),
gasket(5) and nuts(?) from underdeck.
4.
4.Connect two inlet pipes to angle valves, left
one to hot water and right one to cold water
supply.Turn on water to test tightness of all
joints to finish installation.
