alfen Eve Single Pro Series, Руководство пользователя

Страница: 19 / 35

19
Eve Single manual | Version 4.2 | December 2021
ENGLISH
3. ASSEMBLY AND CONNECTING
6. Install the wall-mount frame.
• Use a level and the 5x50 mm wall plugs and screws
provided.
7 . Use a pencil and a spirit level to mark the location for
the holes for the bolts and the wiring (data cable(s):
• 50 mm below wall-mount frame,
• Power supply cable 100 mm below wall-mount frame).
8. Feed the Power supply- and UTP cable approx.
500 mm through the holes.
9. Determine the power supply cable length.
• Temporary hold the charging station on its installation
position.
• Cut the power supply cable to the correct length.
• Strip the wire.
10. Hold the charging station carefully. Uscrew the cable
gland and place it on the bottom of the charging
station.
• Feed the power- and data cable through the cable gland
and cable grommet.
• Cut the data cable grommet to data cable diameter size.
• Pull the power supply cable 300 mm into the charging
station.
11. Mount the charging station on the wall-mount frame.
• Connect the earth wire on the bottom right threaded
end of the wall-mount frame.
• Use the M8 washer and nut for installation.
3.7 Electrical installation
WARNING
Read and follow all of the safety instructions in this manual!
DANGER!
The electrical system must be disconnected from every
power source before performing any installation or
maintenance work!
NOTICE!
Refer to the identification label for your article number.
In the "Quick installation Guide" provided, you will find the
article numbers and corresponding illustrations. Connect
the cables according to your product variant.
3.8 Electrical installation: Eve Single S-line and
Pro-line, 1 phase
3.8.1 Power supply connection
• Connect the power supply wires to the terminal block.
PE L1 N
Figure 5: Electrical connection, S-line / Pro-line, 1 phase
3.8.2 Fixed charging cable connection
• Connect the fixed charging cable wires to the terminal block.
• Connect the control power (CP) connector.
• Connect the PE-cable to the terminal block
PE
L1
N
CP
Figure 6 Electrical connection fixed charging cable, S-line / Pro-line,
1 phase