Seite 3
5. Komponenten
(1) Air inlet
(2) Front panel
(3) Air outlet
(4) Control panel
(5) Filter Set
(6) Pedestal
(7)
Power cable
(8) Carrying handle
6. Placement
·
Min. 10 cm distance to the wall
·
Do not place nearby curtains
·
Place the unit where air circulation is
good.
·
Place the unit near the source of the
polluted air for more effective results
IMPOTANT: The air cleaner is not suitable to
filter oily, greasy air .
Control panel
7. Operation
1. Connect the power
: Connect the power, the unit will start to work when it is plugged in. The initial mode will be
medium speed (with ionizer function).
2. On/Off Button:
Press the button, the unit will be switched off/on. The unit is running with medium speed of the fan
and switched on Ion. You can change it by using the buttons.
3. Fan Speed Button
: Press the button for selection of fan speed.High
–
medium
–
Low. The selected speed will be
shown by LED.
4. Ionizer Button:
Press the button for Ionizer, the indicator will be shown on the control panel, indicating the
selection preferred.
5. Time setting Button:
To enable the timer function, press the button. The selected time 2, 4 or 8 hours will be
shown by LED. The unit will be switched off after end of the selected time.
6. External timer:
It can be connected with external timer to set the working time. The unit has to be switched on. The
initial mode when switched on is middle fan speed and Ion on.. The external timer is not included in the scope of
delivery.
7. SLEEP MODE.
If the sleep mode is selected, the fan will be running with low speed.
8. Filter replacement:
After a running time of 4000 hours the LED will remind to proof the filter set. It may be changed
to a new one. If you change the filter, press the SLEEP-Button for 5 seconds to reset the counting.
