S e i t e
5 | 8
7. Operation
Method of Operation
Connect the power cord:
By pressing the power button, the air cleaner starts to operate at the preset fan speed, the ionizer
is switched off and the display shows the set operating mode.
On / Off-button:
Pressing the power button, the unit will be switched off/on.
If the unit is switched on again, the last selected mode will be activated and can be changed then.
Fan Speed-button:
Press the button for selection of the fan speed (Min-Med-High). The display shows the
current speed.
By using the timer function, the running time of the fan can be set from 1 to 12 hours. The device switches
off automatically after the set running time has elapsed. The timer function can be combined with all other
settings. *)
If the
Sleep-Mode
is selected, the air purifier works very silently with reduced air quantity. The display will
be dimmed so that the lights do not interfere in a dark room. The sleep-Mode can be combined with timer-
function and / or ionizer. By pressing any button, the sleep-mode will be switched off.
Press the button for Ionizer. The operation will be shown on the display.
*) Setting options of the timer function: 30 minutes interval-setting for 1-10 hours and 1 hour interval-setting for 10-12 hours
External timer:
The air purifier can be connected with an external timer to set the working time. When the unit is switched
on, the initial mode will be set to the last used fan-speed. This also applies for the ionizer. The external timer is not included
in the scope of delivery.
Remote control
Using the remote control
The functions are identical to the operating modes to be set via the function buttons on the device.
Point the remote control at the front of the air purifier and select the desired setting.
(1) On / Off Button (Power toogle)
(2) Timer-function
(3) Fan speed
(4) Sleep-Mode
(5) Ionizer On / Off
