Alfda ALB300, Руководство пользователя

Страница: 11 / 16

page | 11
Maintenance
Clean the water tank every 1 to 2 days with warm water and a soft cloth. If the
humidifier is not used for a longer period of time, empty the water tank completely
and then put the unit into operation to start the drying process of the filter unit.
Cleaning the antibacterial filter unit
1. Remove the filter unit.
2. Rinse the filter unit with clean water. A low-pressure flushing method is
recommended, the cleaning time should not exceed 8 minutes.
3. The water temperature should not exceed 60°C. Rubbing may cause slight
discoloration.
4. Weak acids and weak alkaline detergents can be used for cleaning.
5. None of the above mentioned cleaning methods has an influence on the
backwater absorption/cooling effect.
6. During cleaning, the moistening paper absorbs a large amount of water, which
reduces the stiffness of the product. After drying, the stiffness returns to more
than 85% of the normal value.
Exchange of the antibacterial filter unit
Only use original filter units from alfda! The antibacterial filter unit is available at
www.allergiker-shop-alfda.de / Art.-Nr. 161563
Proceed as follows to change the filter unit:
1.
Switch off the unit and unplug the power cord.
2. Lift the upper housing and remove it from the water tank.
3. Remove the float holder, the float and the filter unit.
4. Put the new filter unit, the float and the float holder back into the water tank.
5. Place the upper housing back on the water tank and pay attention to a safe
and correct hold.