ALFAtron ALF-UC1, Руководство пользователя

Страница: 27 / 103

27 / 103
ALF-UC1
5.2 Pairing transmitter with base unit
1. Connect the USB of ALF-USBC-D to either of the 2 x USB port of the ALF-UC1, ALF-USB-L to USB port /
type C port, or the ALF-HDMI-D (HDMI dongle) to USB port, to pair all the Dongles with the base unit.
The home page displays as shown below.
2. When plugging in Dongles, the message table shows “Dongle is booting, please wait…” as shown below
3. Then, the message table will display “Pairing, please wait…” as shown below:
4. After completing the pairing, the message table shows “Succeeded to pair!” on the home page, as shown
below. Then, please un-plug the transmitters and use it for the mirroring of your laptop.
If the error message “Configuration fail” is shown, please check the connection of USB-C is kept stable after
plugging in and try again.
Note: After each change of the SSID / Wi-Fi channel in menu, all the transmitters must be paired again.
When you purchase additional transmitters, or when a transmitter should be assigned to another Base-
unit, the transmitter must be paired again.
A transmitter can only be paired to one Base-unit at a time. The transmitter will always make connection to the
Base-unit it was last paired to.