ALFAtron ALF-SUK2, Руководство пользователя

Страница: 11 / 20

ALF-SUK2
7
4. DIP Switch Operation
4.1 EDID Management
The Extended Display Identification Data (EDID) is used by the source device to match
its video resolution with the connected display. By default, the source device obtains its
EDID from the first connected display. Meanwhile, since the displays with different
capabilities are connected to the splitter, the DIP switch on the front panel can be used
to set the EDID to a fixed value to ensure the compatibility in video resolution.
The switch represents “
1 ” when in the lower ( ON ) position, and it represents “ 0 ” while
putting the switch in the upper ( OFF ) position.
DIP 1~4 are used for EDID setting. The DIP switch status and its corresponding setting
are shown at the back of the product.
# DIP-1 DIP-2 DIP-3 DIP-4
1 0 0 0 0
2 0 0 0 1
3 0 0 1 0
4 0 0 1 1
5 0 1 0 0
6 0 1 0 1
7 0 1 1 0
8 0 1 1 1
9 1 0 0 0
10 1 0 0 1
11 1 0 1 0
12 1 0 1 1
13 1 1 0 0
14 1 1 0 1
15 1 1 1 0
16 1 1 1 1
EDID Setting
4K60Hz_3D_2CH(PCM)_HDR
4K60Hz_3D_5.1CH_HDR
4K60Hz_3D_7.1CH_HDR
4K60Hz_3D_2CH(PCM)
4K60Hz_3D_5.1CH
4K60Hz_3D_7.1CH
Set EDID OUT1 Audio, OUT2 Video MIX
Set EDID OUT2 Audio, OUT1 Video MIX
1080P_7.1CH
4K30Hz_3D_2CH(PCM)
4K30Hz_3D_5.1CH
4K30Hz_3D_7.1CH
4K60Hz(Y420)_3D_7.1CH
JUMPER
EDID COPY (See NOTE 1)
1080P_2CH(PCM)
1080P_5.1CH