ALFAtron ALF-25X-4KCAM, Руководство пользователя

Страница: 43 / 45

ALF-25X-4KCAM
- 40 -
5) Serial port not working
a. Check whether the camera serial device protocol, baud rate and camera address is set correctly.
b. Check whether the control cable is connected correctly.
c. Check that the camera working mode is set to the normal operating mode.
6) Web pages cannot log in
a. Check if the camera outputs video normally by connecting directly to the screen.
b. Check whether the network cable is connected. (Ethernet port light flashes yellow to indicate normal
network cable connection)
c. Check whether your computer is added the segment and the segment is consistent with the IP address
of the camera.
d. Click "Start" and select "Run", then type “cmd” and press ‘enter’ or click "OK". In the DOS command
window type ‘ping 192.168.5.163’ (substitute with relevant IP address if different from default IP) and press
the Enter key to initiate network ping. If the message appears as indicated below, the network connection
is normal.