ALFAtron ALF-12X-NDIC, Руководство пользователя

Страница: 8 / 41

ALFATRON ALF-12X-NDIC, ALF-20X-NDIC and ALF-30X-NDIC
2
1. Fast Installation
1.1 Camera Interface Explanation
Figure 1.1 Interface
1. Camera Lens
2. Camera Base
3. Remote Controller Receiver Light
4. Bottom Dial Switch
5. Tripod Screw Hole
6. RS232 Control Interface (input)
7. RS232 Control Interface (output)
8. RS485 Input (left +, right-)
9. Audio Input Interface
10. 3G-SDI interface
11. HDMI Interface
12. 10/100M Network Interface
13. DC12V Input Power Supply Socket
1.2 Power on initial configuration
1) Power on: Connect DC12V power supply adapter with power supply socket.
2)Initial configuration: Power on with power indicator light on and remote-control receiver light blinking, camera head moves
from bottom left to the bottom, and then goes to the HOME position (intermediate position of both horizontal and vertical),
while the camera module stretches. When remote control receiver light stops blinking, the self-checking is finished
Note: If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0 position.
1.3 Video Output
Video output from LAN, HDMI and 3G-SDI
1) Video Output from LAN
a. Network Cable Connection Port
b. Webpage Login: Open your browser and enter 192.168.5.163 in the address bar (factory default); press Enter to enter
the login page; click on the “player is not installed, please download and install!" and follow the installation steps for
installation. Then enter the username
admin and password admin (factory default); press Enter to enter the preview
page, users can carry out PTZ control, video recording, playback, configuration and other operations.
2) HDMI Video Output
a. HDMI Video Cable Connection
b. Connect the camera and the monitor via HDMII video cable; video output is available after camera self-test.
3) 3G-SDI Video Output
a. 3G-SDI video cable connection
b. Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera self-test.