Alfastreet Marine Energy 18, Руководство пользователя

Страница: 58 / 59

Energy 18 – User Guide
freezing point, it is necessary to check that the vessel does not contain any water (in
pumps, reservoirs, storing surfaces etc.), as it would damage the said parts in the event of
freezing. Damages of the vessel’s components, caused by freezing water is not included in
the warranty conditions. You also need to take into account the guidelines on storing
during winter, which are mentioned by the manufacturers of the motor and other installed
equipment in their user guides.
The most important tasks before the winter storage:
•
pump out all the water from the hull,
•
empty the water pump which you used to remove the water from the hull,
•
clean the hull thoroughly,
•
clean the deck thoroughly,
•
clean the interior of the vessel thoroughly,
•
air and leave to dry the vessel and its equipment for a few days,
•
apply the protective wax to the hull,
•
if possible, remove the batteries from the vessel and keep them in a dry and dark
place (storage or garage), recharge them,
•
make sure that the roof is completely lowered. For a better insulation, you can
apply between the roof and the hull an insulation foam with the diameter of 5 cm,
which is also used for insulating the heating pipes. .
11.6 After the winter storage
What you need to do after winter and before the first navigation:
•
check that the batteries are fully charged,
•
check that the control system is working properly,
•
follow the guidelines of the motor manufacturer about the first ignition after the
winter storing. As this requires special skills, you can ask for assistance or advice
the authorized service centre or the vessel’s manufacturer.
•
Check all the storing surfaces, the motor and battery area, as well as other similar
hidden parts of the vessel, to make sure that any parasites or other animals did not
inhabit these parts during winter.
•
Check the oil level of the motor,
•
check for any damages to the motor, the water pump and the sliding roof due to
freezing,
•
check the attachment of the cleats and other parts used for tying and anchoring the
vessel,
•
check that the propeller and its rotation are flawless.
v1.0 www.alfastreet-marine.si 58