Copyright
©
2005 Alfano, S.A. Tous droits réservés.
2
Introduction
The
TYRECONTROL2
allows you to :
-
Measure the air pressures
-
Adjust the air pressures (only to decrease)
-
Measure the temperatures on the surface of the tyres and the asphalt
-
Memorize these data until 495 sets for 5 vehicles, either 5x99 sets.
1 set = until 34 captures of data + Hour and Date « before
and after
race »
-
With the software "VISUALTYRE" : recover the data recorded for a better analysis and
also bring a help to the configuration of your device
Replacing the batteries
Switch off the device before removing the used batteries to avoid all loss of data recorded. Insert the
two new batteries into the device properly and make sure the terminals "+" and "-" are aligned correctly.
Battery Type : 2 x AA
Important :
It is imperative to use quality batteries manufactured by reputed brands in
order to prevent battery leakage into the device.
A failure caused by the battery acid voids the warranty.
Caution
The Tyrecontrol is a device of precision and, of this fact, it is
sensitive to the electromagnetic currents coming from the engine ignition.
Keep therefore the Tyrecontrol distant (minimum 50cm) of the engine ignition to avoid false
readings or a device
‘
freezing
’
when the engine is running.
