Alfa Romeo Stelvio 2019, Руководство пользователя

Страница: 139 / 268

The Speed Control function can remain
active at the same time as the Speed
Limiter System. If a speed limit below the
one indicated in the set speed control is
set, the speed control speed will be
lowered to that of the Speed Limiter.
Warning!
Leaving the Speed Control system on when
not in use is dangerous. You could
accidentally set the system or cause it to go
faster than you want. You could lose control
and have an accident. Always leave the
system OFF when you are not using it.
Setting The Desired Speed
To set a desired speed, proceed as
follows:
1. Turn the Speed Control on.
2. When the vehicle has reached the
desired speed, push the SET switch up or
down and release to activate. When the
accelerator is released, the vehicle will
maintain the selected speed
automatically.
If needed (when overtaking for instance),
you can accelerate beyond the set speed
by pressing the accelerator. When you
release the pedal, the vehicle goes back
to the previously set speed.
When traveling downhill with the system
active, the vehicle speed may slightly
exceed the set one.
Note:
Before pushing the SET switch, the
vehicle must be traveling at a constant
speed on a flat surface.
To Vary The Speed Setting
Increasing Speed
Once the Speed Control has been
activated, the speed can be increased by
pushing the SET switch upward.
Pushing the switch upward to the first
detent will increase speed in 1 mph
(1 km/h) increments. Pushing the switch
upward to the second detent will
increase speed by 5 mph (10 km/h)
increments. The new speed will then be
set.
At every movement of the SET switch,
the set speed will be adjusted.
Decreasing Speed
When the system is active, to reduce the
speed, push the SET switch downward.
Pushing the switch downward to the first
detent will decrease speed in 1 mph
(1 km/h) increments. Pushing the switch
downward to the second detent will
decrease speed by 5 mph (10 km/h)
increments. The new speed will then be
set.
At every movement of the SET switch,
the set speed will be adjusted.
Note:
Moving the SET switch allows the driver
to adjust the speed according to the
selected unit of measurement set in the
Information and Entertainment System
(see dedicated supplement).
Accelerating When Overtaking
Press the accelerator as you would
normally. When the pedal is released, the
vehicle will return to the set speed.
Use Of The Feature On Hilly Routes
The vehicle can automatically downshift
to keep the set speed when driving on
hilly routes.
On steep grades, the loss or gain in speed
may be considerable and is advisable to
deactivate the Speed Control system.
Note:
The system keeps the speed set even
uphill and downhill. A slight variation in
the speed on slight elevations is
completely normal.
To Resume The Speed
Note:
Before returning to the previously set
speed, you must accelerate to a speed
close to the set speed, then push and
release the RES button.
137