14
Error (alarm)
code
Error (alarm) description
Er01
Safety thermostat activated
Er02
Safety manometer activated
Er03
Extinguishing due to low temperature of flue gases
Er04
Extinguishing due to high water temperature in the boiler
Er05
Extinguishing due to high temperature of flue gases
Er07
Encoder error. No signal
Er08
Encoder error. Unable to adjust the number of revolutions
Er09
Water pressure too low
Er10
Water pressure too high
Er11
Error due to problems with the internal clock
Er12
Extinguishing due to ignition failure
Er15
Power outage longer than 50 minutes
Er16
Communication error RS485
Er17
Airflow regulator error
Er18
No pellet
Er25
Firebox cleaning motor error
Er26
Turbulator cleaning motor error
Er39
Airflow regulator failure
Er41
Minimum airflow in CHECK UP phase not reached
Er42
Maximum airflow reached
Er47
Auger encoder signal error
Er48
Unable to adjust the number of revolutions of auger motor
10.3.
Menu
Enter the main menu by selecting the icons in the bottom start screen.
When there is a system error, the top right
corner shows the error code and symbol !
Pressing this section of the screen will open
the error window.
If the system works without problems, the top
right corner will show the symbol
i
