background image

 

24

-

 

the connection or the repair of the product was performed by an unauthorized persons, that is, if unoriginal parts 

have been embedded,  
- if the device has not been properly used in accordance with these guidelines, 
- if some mechanical damaging of the device occured during usage, 
- if the repairs of defects were performed by an unauthorized person, 
- if the device has been used for commercial purposes, 
- if the damage has occured during transportation after the device was sold, 
- if the defects occured due to improper mounting, improper maintanace or mechanical damaging by the buyer, 
- if the defect occured after too strong or insufficient power, as well due to force major.  
We can repair the defects of Your device also outside the guaranteed period, with original spare parts for which we 
also provide a guarantee under the same conditions. 
This guarantee does not exclude or affect the rights of the customer in regard to the conformity of the goods 
pursuant to the legal regulations. If the delivered product does not conform to the agreement, the customer has the 
right to ask the seller to repair that lack of conformity without any reimbursement, by repair or change of the product 
in accordance with the valid legal regulations.   

 

 
 
 
 
 
 
CONTENTS 
 

0.0  Technical characteristics of the stove 
1.0  Purpose of this instruction 
1.1  Updating 
2.0  Responsibility of the manufacturer 
2.1  Basic characteristics of the user 
2.2  Transportation and usage of the stove-handling 
2.3  Responsibility of the manufacturer 
3.0  Installation – embedding of the stove 
3.1  Placement of the stove 
3.2  Smoke exhaust system 
3.3  Insulation and diameter of the hole, that is, opening (on the wall or on the roof) 
3.4  Inlet for combustion air 
3.5  Connection to power supply 
4.0  Important instructions 
5.0  Warning safety measures for the maintenance staff 
5.1  Warning safety measures for the user 
6.0  Standards for burning and cleaning the stove 
6.1  Routine maintenance and cleaning of the stove that is performed by the user 
6.2  Places for inspection and maintenance  
6.3  Special maintenance 
7.0  Important safety data 
8.0  Quality of the biofuel pellets 
8.1  Storage of the pellets 
9.0. Description and functioning of the electronic card 
9.1 Description of the electronic card (keyboard) 
9.2 Functioning of the electronic card 
9.3 Parameters used by the stove user 
9.4 Alarm management 
10.0 Information about disposal (throwing) and disassembly of the stove 
11.0 Guarantee 

Содержание Alfa 9

























Отзывы: