5
screwing it again, the sealing braid that is on the cover should be controlled for sealing and, if necessary, it should be
replaced.
5.2.
M AINTEN ANCE AND CLE ANING OF THE COOKING PLATE
For cleaning of the cooking plate, use small sandpaper or abrasive. And during cleaning of the plate, wipe it with a semi-
wet towel and in the end with a dry towel. Make sure that the stretching grooves on the cooking plate remain free with no
crust, in order to enable stretching of the plate as an action of heat.
Baked food scraps or parts of slag in the grooves may cause deformation of the cooking panel.
Do not leave pots or pans on the cold cooking plate, edges may be created by corrosion, which are difficult to remove.
5.3.
REMOV AL OF S L AG AND ASH
Slag is removed with the supplied tool, through the slide opening. The ashtray should be emptied regularly, every time
before lighting the fire. 1 - 2 times a week the grid should be cleaned. If the air vents are clogged with slag, baked crust or
other burnt residues, completely remove the grid and clean it.
6.
GENERAL NOTES
If you observe the instructions for installation and handling, the stove is a reliable home appliance. All defects on your
stove can be rectified by our customer service team.
When lodging complaints regarding faults or defects arising in connection with the functionality, please contact our
customer service team. They can also assist in the procurement of spare parts (use only original parts).
The entire firing appliance must be regularly checked by an expert.
