manualshive.com logo in svg

Alfa Network AIP-610H, Руководство пользователя, Страница: 48 / 50

Поделиться
Скачать
Alfa Network AIP-610H Скачать руководство пользователя страница 48

    But, if the boss machine wants to have 128 kbit guaranteed as well? Proceed as follow:   

Group ID: 1 LAN Out rate: 300 WAN Out rate: 300   

Group ID: 1 IP: 192.168.x.x LAN Out rate: 64 WAN Out rate: 64   

Group ID: 1 IP: 192.168.x.x LAN Out rate: 128 WAN Out rate: 128   

Group ID: 1 IP: 0.0.0.0 LAN Out rate: 0 -> Internet Total download rate -> Internet Total 
upload rate     

-> Member of QoS group ID 1   

-> Voip machine IP address -> 64 kbit guaranteed -> 64 kbit guaranteed   

-> Member of QoS group ID 1   

-> Boss ip address -> 128 kbit guaranteed -> 128 kbit guaranteed   

-> Member of QoS group ID 1 -> 0.0.0.0= the entire network WAN Out rate: 0   

    And so on. We can guarantee as many machines as we want. The rest, will share...   

=> TRAFFIC CONTROL VIA CONFIG FILE INSTEAD OF WEB INTERFACE     

This version allow unlimited IP or MAC address traffic control, via /etc/cbu.conf file. Via 

WEB interface you can only control up to 40 entries. The file /etc/cbu.conf uses the same idea 
as via WEB interface. After you

’

re done with file changes, you have to type the following 

commands in order, to save and activate the changes:   

  # salva

r  

  # /bin/cbu.s

h  

  # /bin/firewall.s

h  

 

NOTE: 

REMEMBER TO ACTIVATE TRAFFIC CONTROL VIA WEB INTERFACE.   

Содержание AIP-610H



















































Отзывы:

Нет отзывов